2022-07-23
The ozone generator is in the form of horizontal installation, which can be directly placed on the ground, or installed on the foundation, or fixed on the shelf; due to the horizontal installation and by observing the sealing plate of the end, it can be easily checked and maintained.
Zhiwei ozone generator consists of the following parts:
air source inlet and distribution chamber; high-voltage distribution is installed in the air source inlet distribution chamber to provide electricity for the ozone generating unit; generator tank, ozone discharger is installed in it; ozone outlet collection chamber ; Cooling water cavity, isolated from the generator tank body and sealed stainless steel pipe welded at both ends, as a cooling water cavity. Cooling inlet and outlet pipes; the discharge body is installed in a stainless steel pipe; the tank body acts as a ground electrode:
Ozone control panel
model: ZWVFC-2.1
Ozone control panel
model: ZWVFC-2.1
By controlling the power supply control board, so that the high and low pressure control board for ozone generation of the whole module discharge control, automatic adjustment of parameters. Real-time communication with PLC ozone treatment unit
High frequency reactor
High frequency reactor can be customized according to the parameter requirements.
High frequency transformer
High frequency transformer can be customized according to the parameter requirements.